Ilan Griboff

Introduction GCP Placement Timing Surveying Equipment Layout Rules of Thumb How to Place a GCP GCPs for Slab on Grade Areas Recording the GCP Coordinates 1 Introduction Siteaware's Digital Constr...

The two main tools used during the Self-Capture process are:    Ground Control Point Stickers (GCPs) Sticker targets that are placed on the deck and help Siteaware achieve the tightest tolerance...

1.0 Background Congratulations! You are going to be flying a drone to perform Self-Capture on your Site for Siteawares Construction Quality Assurace Program. Before flying the drone for the first t...

Self-capture allows you unlimited scans, enabling you to capture based on your actual progress and ensuring that every element is verified before the pour. Example: Scan once as each trade is 80% ...

Self-capture is a simple process broken down into 5 steps:    Place and Measure GCPs: Place GCP stickers on the deck and measure their coordinates.  Upload GCP Coordintes: Upload the GCP coordina...

The Self-Capture Upload Portal can be accessed here. Logging In Your Siteaware login credentials will be used to access the portal. All project team members who will be part of the Self-Capture pro...

After completing the scan. remove the drive and insert it into a computer. Upload the data to Siteaware via the Self-Capture Upload Portal The Self-Capture Upload Portal can be accessed here. Logg...

Turn on the NavVis device and wear it per the manufacturer's instructions.  Use the following naming format for the dataset: <Project - Building>   <Level>   <Pour>   <Scan #>  -  Date Begin ...

Before heading to the deck with the NavVis scanner:  Review the scan path (See example below) provided by Siteaware including the control-point locations. Walk the path without the equipment to en...

Introduction CP Placement Method Uploading Control Points 1 Introduction Siteaware's Digital Construction Verification system relies on the dispersion of accurately measured control points (CPs) ...