Ilan Griboff
- Total activity 102
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 49
Articles
Recent activity by Ilan Griboff-
What are the tools involved in Lidar Self-Capture
The tools used during Lidar Self-Capture will vary slightly based on the construction type of the building being scanned. Steel Decks with Columns Installed Concrete Decks or Slab-On-Grade/Void ...
-
What are the tools involved in Interior Self-Capture
To perform self-capture for interiors, you will scan each unit using the NavVis VLX2, VLX3, or MLX (coming soon) wearable Lidar device. NavVis VLX2 or VLX3 Wearable Lidar NavVis MLX Handheld Lid...
-
Uploading Core Crane Scan Data via the Self-Capture Upload Portal
The Self-Capture Upload Portal can be accessed here. Logging In Your Siteaware login credentials will be used to access the portal. All project team members who will be part of the Self-Capture pro...
-
Step 5: Uploading Images via the CaptureApp
Remove the SD card from the drone, insert it into the controller, and enter Step 5: Upload Images. Select the capture height (the elevation at which the flight was completed) The app will default...
-
Step 4: Hoisting and Scanning with the Crane Pod
Verify the hotspot is still active and the drone is still connected to the controller. Verify that the NTRIP credentials are indicated in green (successful connection) And the RTK icon at the t...
-
Step 3: Calibrating the Drone Camera and Preparing the Pod for Capture
A key element of Crane Camera Capture is the camera settings applied. Siteaware recommends performing this calibration step once the pod has been hung on the crane hook. Before performing this ste...
-
Step 2: Uploading GCP Coordinates to Siteaware
Siteaware recommends utilizing one of the following methods to transfer the GCP readings to the CaptureApp: Receive the coordinate readings via email on a mobile device or on the drone controller...
-
Step 1: GCP Placement Guide
Introduction GCP Placement Timing Surveying Equipment Layout Rules of Thumb How to Place a GCP GCPs for Slab on Grade Areas Recording the GCP Coordinates 1 Introduction Siteaware's Digital Constr...
-
What are the steps of Crane Self-Capture?
Self-capture is a simple process broken down into 5 steps: Place and Measure GCPs: The user will place GCP stickers on the deck and measure their coordinates. Upload GCP Coordinates: The user ...
-
What are the tools involved in Crane Self-Capture
The two main tools used during the Self-Capture process are: Ground Control Point Stickers (GCPs) Sticker targets that are placed on the deck and help Siteaware achieve the tightest tolerances ...